اشنایی با سری روتر 1800 و ماژول ها

Table of Contents

Cisco 1800 Series integrated services routers are the next evolution of the award-winning Cisco 1700 Series modular access routers. Cisco 1800 Series integrated services routers are the next evolution of the award-winning Cisco 1700 Series routers. The Cisco 1801, 1802, 1803, 1811, and 1812 routers are fixed configuration, while the Cisco 1841 is modular. Powered by Cisco IOS software , the Cisco 1800 Series router supports the Cisco Self-Defending Network with advanced security services and management capabilities such as hardware encryption acceleration, IPSec VPN (AES, 3DES, DES), firewall protection, inline intrusion prevention (IPS), Network Admission Control (NAC), and URL filtering support. For ease of management and configuration, the Cisco 1800 Series ship with the intuitive, web-based Cisco Router and Security Device Manager (SDM) pre-installed. Base Models WIC-1ADSL-DG HWIC-ADSLI-B-S/T CISCO1801 WIC-1ADSL-I-DG USB CISCO1802 WIC-1SHDSL – EoS Aladdin eToken CISCO1803 WIC-1SHDSL-V2 – EoS USB Flash CISCO1811 WIC-1SHDSL-V3 Voice Interface Cards (Data Only) CISCO1812 WIC-1AM VWIC-1MFT-E1 CISCO1841 WIC-2AM VWIC-2MFT-E1 – HWIC VWIC-1MFT-G703 WAN Interface Cards HWIC-4ESW VWIC-2MFT-G703 WIC-1T HWIC-4A/S VWIC-2MFT-E1-DI WIC-2T HWIC-8A/S-RS232 2nd Generation VWIC WIC-2A/S HWIC-8A – WIC-1B-S/T-V3 HWIC-AP-G-X – WIC-1B-U-V2 HWIC-AP-AG-X – WIC-1DSU-56K4 HWIC-1ADSL – WIC-1ADSL HWIC-ADSL-B-S/T AIM’s – HWIC-1ADSLI AIM-VPN/BPII-PLUS

CISCO1801 / CISCO1801W-AG-E/K9

1. Compact Flash Slot

1. ADSL over POTS WAN port
2. ISDN BRI S/T port
3. Managed 8-port FE switch
4. FE WAN port*
5. Console and AUX ports
6. POE connector**
7. Power switch
8. Power connector
9. RP-TNC antenna connectors (wireless models only)***

Notes:

*The Cisco 1801 only has one FE WAN port, which is the lower of the two ports shown. The upper port is disabled, and reserved for a future purpose.

** Inline power is a field-upgradable option only. It is not installed by default. An PoE power supply and cable can be ordered. The product code is: POE-180X=.

*** Dipole swivel antennas are shipped with the router to connect to the RP-TNC connectors to operate the 802.11a/b/g radio module. The antenna included is: AIR-ANTM2050D-R

ADSL2/2+ support from IOS release 12.4(4)T and onwards

Return to Top

CISCO1802/K9 / CISCO1802W-AG-E/K9

1. Compact Flash Slot

1. ADSL over ISDN WAN port
2. ISDN BRI S/T port
3. Managed 8-port FE switch
4. FE WAN port*
5. Console and AUX ports
6. POE connector**
7. Power switch
8. Power connector
9. RP-TNC antenna connectors (wireless models only)***

Notes:

* The Cisco 1802 only has one FE WAN port, which is the lower of the two ports shown. The upper port is disabled, and reserved for a future purpose.

** Inline power is a field-upgradable option only. It is not installed by default. An PoE power supply and cable can be ordered. The product code is: POE-180X=.

*** Dipole swivel antennas are shipped with the router to connect to the RP-TNC connectors to operate the 802.11a/b/g radio module. The antenna included is: AIR-ANTM2050D-R

 

CISCO1803/K9 / CISCO1803W-AG-A/K9

1. Compact Flash Slot

1. G.SHDSL WAN port
2. ISDN BRI S/T port
3. Managed 8-port FE switch
4. FE WAN port*
5. Console and AUX ports
6. POE connector**
7. Power switch
8. Power connector
9. RP-TNC antenna connectors (wireless models only)***

Notes:

* The Cisco 1803 only has one FE WAN port, which is the lower of the two ports shown. The upper port is disabled, and reserved for a future purpose.

** Inline power is a field-upgradable option only. It is not installed by default. An PoE power supply and cable can be ordered. The product code is: POE-180X=.

*** Dipole swivel antennas are shipped with the router to connect to the RP-TNC connectors to operate the 802.11a/b/g radio module. The antenna included is: AIR-ANTM2050D-R

 

CISCO1811/K9 / CISCO1811W-AG-A/K9

1. Compact Flash Slot

1. V.92 Modem port
2. USB 2.0 ports
3. Managed 8-port FE switch
4. FE WAN port
5. Console and AUX ports
6. POE connector*
7. Power switch
8. Power connector
9. RP-TNC antenna connectors (wireless models only)**

Notes:

* Inline power is a field-upgradable option only. It is not installed by default. An PoE power supply and cable can be ordered. The product code is: POE-181X=.

** Dipole swivel antennas are shipped with the router to connect to the RP-TNC connectors to operate the 802.11a/b/g radio module. The antenna included is: AIR-ANTM2050D-R

CISCO1812/K9 / CISCO1812W-AG-E/K9

1. Compact Flash Slot

1. ISDN BRI S/T port
2. USB 2.0 ports
3. Managed 8-port FE switch
4. FE WAN port
5. Console and AUX ports
6. POE connector*
7. Power switch
8. Power connector
9. RP-TNC antenna connectors (wireless models only)**

Notes:

* Inline power is a field-upgradable option only. It is not installed by default. An PoE power supply and cable can be ordered. The product code is: POE-181X=.

** Dipole swivel antennas are shipped with the router to connect to the RP-TNC connectors to operate the 802.11a/b/g radio module. The antenna included is: AIR-ANTM2050D-R

CISCO1841

1. System Power (SYS PWR) LED
2. System Activity (SYS ACT) LED

1. Input power connection
2. On/Off switch
3. Slot 0 (WIC, VWIC—data only, or HWIC)
4. Console port
5. Fast Ethernet ports and LEDs
6. Kensington TM security slot
7. Slot 1 (WIC, VWIC—data only, or HWIC)
8. CompactFlash memory card slot
9. CompactFlash (CF) LED
10. AIM LED
11. USB port
12. Aux port
13. Chassis ground connection

Notes:

The Cisco 1841 is a Integrated services router with 2 WIC/HWIC Slots, 2 integrated 10/100Base-T ethernet ports, and 1 AIM slot.

Note: The WIC/HWIC/VWIC (in data mode only) slots on the Cisco 1841 router do not support Cisco product-based inline power, or Power-over-Ethernet (POE). More information.

WIC-1T

One port serial (DB60, Cisco 60-pin “5-in-1” connector ). Supports Max sync speed 2 Mbps. Does not support hot swap.

Platform Support
Feature	Carrier Module	Cisco IOS software support	Sync Max Speed	Async Max Speed	Bisync & Half Duplex
1600	On-Board	All Cisco IOS versions	2.048 Mbps	115.2 Kbps	Cisco IOS Versions 11.2(8)P and later
1700	On-Board	All Cisco IOS versions	2.048 Mbps	115.2 Kbps	All Cisco IOS versions
1800	On-Board	12.3(8)T4	2.048 Mbps	–	–
2600	On-Board, NM-2W	All Cisco IOS versions	2.048 Mbps	Not supported	All Cisco IOS versions
2800	On-Board	12.3(8)T4	2.048 Mbps	–	–
3600	NM-1E2W, NM-1E1R2W, NM-2E2W, NM-1FE2W, NM-1FE1R2W, NM-2FE2W, NM-2W	All Cisco IOS versions	2.048 Mbps	Not supported	Cisco IOS Versions 11.2(4)XA, 11.3, 11.3T, and all 12.x
3631	On-Board	Cisco IOS versions 12.2(13)T, 12.3(1), 12.3(2)T and higher	2.048 Mbps	Not supported	Cisco IOS versions 12.2(13)T, 12.3(1), 12.3(2)T and higher
2691, 3725, 3745	On-Board, NM-1FE2W, NM-1FE1R2W, NM-2FE2W, NM-2W	12.2(13)T, 12.2(11)YT, 12.3(1), 12.3(2)T and higher	2.048 Mbps	Not supported	Cisco IOS versions 12.2(13)T, 12.2(11)YT, 12.3(1), 12.3(2)T and higher
3800	On-Board, NM-2W, NM-1FE1R2W, NM-1FE2W, NM-2FE2W, NM-1FE2W-V2, NM-2FE2W-V2	12.3(11)T	2.048 Mbps	–	–

WIC-2T

Provides two serial ports using the “smart serial” connector.

• Asynchronous support with a maximum speed (per port) of 115.2 Kbps, minimum 600 bps. If you need to run at speeds lower than 600 bps, use the AUX port instead.
• Synchronous support with a maximum speed of 2.048 Mbps per port.
  • Supports one port at 8 Mbps when used in NM-1FE1R2W, NM-1FE2W, NM-2FE2W, or NM-2W, or Cisco 2600 chassis WIC slots. All other WIC ports on that network module or Cisco 2600 chassis must not be used.
  • Supports two ports at 4 Mbps each when used in NM-1FE1R2W, NM-1FE2W, NM-2FE2W, or NM-2W, or Cisco 2600 chassis WIC slots. All other WIC ports on that network module or Cisco 2600 chassis must not be used.
  • Supports 8 Mbps on all ports simultaneously on 2691, 3725, and 3745. No restrictions. Maximum six ports at 8 Mbps each.

Platform Support
Feature	1600	1700	1800	2600		2600XM		2800	3620, 3640, 3660		3631	2691, 3725, 3745	3800
Carrier Module	Not Required	On-Board	On-Board	On-Board	NM-2W	On-Board	NM-2W	On-Board	NM-1E2W, NM-1E1R2W, and NM-2E2W	NM-1FE2W, NM-1FE1R2W, NM-2FE2W, NM-2W	On-Board	On-Board, NM-1FE2W, NM-1FE1R2W, NM-2FE2W, NM-2W	On-Board	NM-1FE2W, NM-1FE2W-V2, NM-2FE2W, NM-2FE2W-V2, NM-1FE1R2W, NM-2W
Cisco IOS software support	Not supported	All Cisco IOS versions	12.3(8)T4	All Cisco IOS versions	12.0(7)XK, 12.1(1)T, 12.2, 12.2T	All Cisco IOS versions	12.2(8)T1	12.3(8)T4	Not supported	12.0(7)XK, 12.1(1)T, 12.2, 12.2T	All Cisco IOS versions	All Cisco IOS versions	12.3(11)T	12.3(11)T

 

The Cisco 1600 Series is not capable of supporting the WIC-2T due to lack of Serial Communications Controllers.

The NM-1E2W, NM-1E1R2W, and NM-2E2W Network Modules do not have enough performance power to support the WIC-2T due to hardware limitations.

WIC-2A/S

The WIC-2A/S provides two serial ports using the Smart Serial connector. The only difference between the WIC-2A/S and the WIC-2T is the maximum supported sync speed.

• Aysnchronous support with a maximum speed of 115.2 Kbps, and a minimum of 600 bps. If you need to run at speeds lower than 600 bps, use the AUX port instead.
• Synchronous support with a maximum speed of 128 Kbps.

 

Platform Support
Feature	1600	1700	1800	2600		2600XM		2800	3620, 3640, 3660		3631	2691, 3725, 3745	3800
Carrier Module	Not Required	On-Board	On-Board	On-Board	NM-2W	On-Board	NM-2W	On-Board	NM-1E2W, NM-1E1R2W, and NM-2E2W	NM-1FE2W, NM-1FE1R2W, NM-2FE2W, NM-2W	On-Board	On-Board, NM-1FE2W, NM-1FE1R2W, NM-2FE2W, NM-2W	On-Board	NM-1FE2W, NM-1FE2W-V2, NM-2FE2W, NM-2FE2W-V2, NM-1FE1R2W, NM-2W
Cisco IOS software support	Not supported	All Cisco IOS versions	12.3(8)T4	All Cisco IOS versions	Cisco IOS versions 12.0(7)XK, 12.1(1)T, 12.2, 12.2T	All Cisco IOS versions	Cisco IOS versions 12.2(8)T1	12.3(8)T4	Not supported	Cisco IOS versions 12.0(7)XK, 12.1(1)T, 12.2, 12.2T	All Cisco IOS versions	All Cisco IOS versions	12.3(11)T	12.3(11)T

The Cisco 1600 series is not capable of supporting the WIC-2A/S due to the lack of Serial Communications Controllers.

The NM-1E2W, NM-1E1R2W, and NM-2E2W Network Modules do not have enough performance power to support the WIC-2A/S due to hardware limitations.

WIC-1B-S/T – End of Sale ,WIC-1B-S/T-V2, WIC-1B-S/T-V3

One ISDN BRI port (S/T interface, requires external NT-1, RJ-45 connector). Does not support hot swap.

 

Platform Support
Platform	Cisco 1601(R), 1602 (R), and 1605-R	Cisco 1603, 1603-R, 1604, and 1604-R	Cisco 1720, 1721, 1751, 1760	Cisco 1750	Cisco 1800	Cisco 2600 and 2600XM		Cisco 2800	Cisco 3620 and 3640, 3640A		Cisco 3631	Cisco 3660		Cisco 2691, 3725, and 3745		Cisco 3800
Carrier Module	On-Board	On-Board	On-Board	On-Board	On-Board	On-Board	NM-2W	On-Board	On-Board	NM-2W	On-Board	NM-1E2W, NM-1E1R2W, and NM-2E2W	NM-1FE2W, NM-1FE1R2W, and NM-2FE2W, NM-2W	On-Board	NM-1FE2W, NM-1FE1R2W, NM-2FE2W, and NM-2W	Onboard, NM-1FE2W, NM-1FE2W-V2, NM-2FE2W, NM-2FE2W-V2, NM-1FE1R2W, NM-2W
WIC-1B-S/T	All Cisco IOS versions	Not supported	All Cisco IOS versions	All Cisco IOS versions	Not supported	All Cisco IOS versions		Not supported	Cisco IOS versions 11.2(4)XA, 11.2(5)P, 11.3, 11.3T, all 12.x		All Cisco IOS versions	All Cisco IOS versions		All Cisco IOS versions		Not supported
WIC-1B-S/T-V2	Not supported	Not supported	First supported in 12.0(25), 12.1(19), 12.2(16), and 12.3(1)	Not supported	–	First supported in 12.0(25), 12.1(19), 12.2(16), and 12.3(1)		–	First supported in 12.0(25), 12.1(19), 12.2(16), and 12.3(1)		First supported 12.3(1)	First supported in 12.0(25), 12.1(19), 12.2(16), and 12.3(1)		First supported in 12.3(1)		–
WIC-1B-S/T-V3	Not supported	Not supported	12.3(10)	Not supported	12.3(8)T4	12.3(10)		12.3(8)T	Not Supported		Not Supported	12.3(10)		12.3(10)		12.3(11)T

WIC-1B-U-V2

1-port ISDN with NT-1 WIC. Provides a single ISDN BRI connection via an RJ-45 connector.

 

Platform Support
Platform	Cisco 1700	Cisco 1800	Cisco 2600, 2600XM	Cisco 2800	Cisco 3600	Cisco 2691, 3725, and 3745	Cisco 3800
WIC-1B-U-V2	12.1(18), 12.2(13), 12.2(13)T1	12.3(8)T4	12.0(23), 12.1(15), 12.2(10), 12.1(11)T	12.3(8)T	12.0(23), 12.1(15), 12.2(10), 12.1(11)T	12.2(13)T	12.3(11)T

WIC-1DSU-56K4

1-port 4-wire 56/64Kbps DSU/CSU WIC. Provides a single serial connection at speeds up to 64 Kbps.

 

Platform Support
Platform	Cisco 1721	Cisco 1751	Cisco 1760	Cisco 1800	Cisco 2600	Cisco 2600XM	Cisco 2800	Cisco 3620, 3640	Cisco 3660	Cisco 2691, 3725, and 3745	Cisco 3800
WIC-1DSU-56K4	12.2(8)T	12.2(4)T	12.2(11)T	12.3(8)T	11.3(2)XA, 12.1(3)T	12.1(14), 12.2(2), 12.2(8)T1	12.3(8)T4	11.2(4)XA	12.0(5)T	12.2(8)T	12.3(11)T

WIC-1ADSL

One RJ-11 ADSL interface. Supports ADSL over POTS with Annex A ITU 992.1 (G.dmt). Supports up to 23 virtual circuits per WIC. Dying gasp is not supported on WIC-1ADSL, For Dying gasp support please refer to WIC-1ADSL-DG.

 

Platform Support
Platform	Cisco 1600	Cisco 1700	Cisco 1800	Cisco 2600	Cisco 2600XM	Cisco 2800	Cisco 3600		Cisco 3631	Cisco 2691, 3725, and 3745		3800
Carrier Module	On-Board	On-Board	On-Board	On-Board, NM-2W	On-Board, NM-2W	On-Board	NM-1E1R2W, NM-1E2W, NM-2E2W	NM-1FE1R2W, NM-1FE2W, NM-2FE2W, NM-2W	On-Board	On-Board	NM-1FE1R2W, NM-1FE2W, NM-2FE2W, NM-2W	On-Board	NM-1FE2W, NM-1FE2W-V2, NM-2FE2W, NM-2FE2W-V2, NM-1FE1R2W, NM-2W
WIC-1ADSL	Not Supported	12.1(3)XJ, 12.1(3)XP, 12.1(3)XT1, 12.1(5)YB, 12.2(2)T	12.3(8)T4	12.1(5)YB, 12.2(4)T	12.2(8)T1	12.3(8)T4	Not Supported	12.1(5)YB, 12.2(4)T	Not Supported	All Cisco IOS versions	All Cisco IOS versions	12.3(11)T	12.3(11)T

 

Requires an “ADSL” feature set for CISCO 1700 series. Requires a “Plus” feature set for CISCO 2600 / 2600XM / 3600 / 3700 series.

WIC-1ADSL-DG

One RJ-11 ADSL interface. Supports ADSL over POTS with Annex A ITU 992.1 (G.dmt). Supports up to 23 virtual circuits per WIC. Dying Gasp Support.

 

Platform Support
Platform	Cisco 1721, 1751, 1760	Cisco 1800	Cisco 2600XM	Cisco 2800	Cisco 2691, 3725, and 3745		3800
Carrier Module	On-Board	On-Board	On-Board, NM-2W	On-Board	On-Board	NM-1FE1R2W, NM-1FE2W, NM-2FE2W, NM-2W	On-Board	NM-1FE2W, NM-1FE2W-V2, NM-2FE2W, NM-2FE2W-V2, NM-1FE1R2W, NM-2W
WIC-1ADSL	12.3(4)T	12.3(8)T4	12.3(4)XD	12.3(8)T4	12.3(4)XD	12.3(4)XD	NM-1FE1R2W, NM-1FE2W, NM-2FE2W, NM-2W	12.3(11)T

 

Requires an “ADSL” feature set for CISCO 1700 series. Requires a “Plus” feature set for CISCO 2600 / 2600XM / 3600 / 3700 series.
The term dying gasp refers to power status as defined in ITU-T standard G.991.2, section 7.1.2.5.3.

WIC-1ADSL-I-DG

Provides a single ADSL over ISDN connection, with Dying Gasp support, at uplink speeds up to 1 Mbps and downlink speeds up to 8 Mbps. This interface card inserts into a Cisco mixed-media network module or directly into a Cisco WIC expansion slot.

 

Platform Support
Platform	Cisco 1721, 1751, 1760	Cisco 1841	Cisco 2610XM-51XM	Cisco 2691	Cisco 2800	3725, 3745	3800
WIC-1ADSL-I-DG	12.3(4)T	12.3(8)T4	12.3(4)XD	12.3(4)XD	12.3(8)T4	12.3(4)XD	12.3(11)T

Requires an “ADSL” feature set for CISCO 1700 series. Requires a “Plus” feature set for CISCO 2600 / 2600XM / 3600 / 3700 series.
The term dying gasp refers to power status as defined in ITU-T standard G.991.2, section 7.1.2.5.3.

WIC-1SHDSL End Of Sale

One RJ-11 G.SHDSL interface. Symmetrical WAN speeds (up to 2.3 Mbps) over a single copper pair. Supports up to 23 virtual circuits per WIC.

 

Platform Support
Platform	Cisco 1600	Cisco 1700	Cisco 1800	Cisco 2600	Cisco 2600XM	Cisco 2800	Cisco 3600	Cisco 3631	Cisco 2691, 3725, and 3745	Cisco 3800
WIC-1SHDSL	Not Supported	12.2(13)T	12.3(8)T4	12.2(4)XL, 12.3(1)	12.2(8)T1, 12.2(11)YT, 12.3(1), 12.3(2)T	12.3(8)T4	12.2(8)T	12.3(2)T	12.2(13)T, 12.2(11)YT, 12.3(1), 12.3(2)T	12.3(11)T

Requires 1700, 1800, 2600, 2800, 3700, 3800 Chassis WIC Slot, or NM-1FE1R2W, NM-1FE2W, NM-2FE2W, NM-2W WIC slots. Not supported in NM-1E1R2W, NM-1E2W, or NM-2E2W.

Requires an “ADSL” feature set for CISCO 1700 series. Requires a “Plus” feature set for CISCO 2600 / 2600XM / 3600 / 3700 series.

WIC-1SHDSL-V2 End Of Sale

One RJ-11 G.SHDSL interface. Symmetrical WAN speeds up to 2.3Mbps over a single copper pair and up to 4.6Mbps over two copper pairs. Supports up to 23 virtual circuits per WIC.

 

Platform Support
Platform	Cisco 1600	Cisco 1700	Cisco 1800	Cisco 2691	2610-2651XM	Cisco 2800	3725, 3745	3800
WIC-1SHDSL-V2	Not Supported	12.3(8)T	12.3(8)T4	12.3(4)XD	12.3(4)XD	12.3(8)T4	12.3(4)XD	12.3(11)T

 

Requires 1700, 1800,2600, 2800, 3800 Chassis WIC Slot, or NM-1FE2W-V2, NM-2FE2W-V2, and NM-FE1R2W-V2.

WIC-1SHDSL-V3

One RJ-11 G.SHDSL interface. Symmetrical WAN speeds up to 2.3Mbps over a single copper pair and up to 4.6Mbps over two copper pairs. Supports up to 23 virtual circuits per WIC.

 

Platform Support
Platform	Cisco 1600	1721,1751,1760	1841	Cisco 2691	2610-2651XM	2811-2851	3725, 3745	2825,3845
WIC-1SHDSL-V3	Not Supported	IP/ADSL IP Base and up	IP Base and up	IP Base and up	IP Base and up	IP Base and up	IP Base and up	IP Base and up

 

* Minimum IOS release 12.4(2)XA and Mimimum IOS T train support 12.4(3rd)T or 12.4(6)T

**Difference between V2 and V3 – Conexant Firmware Version as of 8/20/2005, A29733 (based on 2.3.1)for V2, 3.0.1 for V3

***Requires 1700, 1800,2600, 2800, 3800 Chassis WIC Slot, or NM-1FE2W-V2, NM-2FE2W-V2, and NM-1FE1R2W-V2.

Analogue Modem WICs

WIC-1AM

WIC-2AM

WIC-1AM and WIC-2AM provide V.90 analog modem interfaces for low density applications (router management, dial backup and access). WIC-1AM includes jack for handset sharing access to PSTN line.

 

Platform Support
Platform	Cisco 1600	Cisco 1700	Cisco 1800	Cisco 2600	Cisco 2600XM	Cisco 2800	Cisco 3600	Cisco 3631	Cisco 2691, 3725, and 3745	Cisco 3800
WIC-1AM	Not Supported	12.2(4)YB	12.3(8)T4	12.2(2)XB, 12.2(8)T	12.2(8)T1	12.3(8)T4	12.2(2)XB, 12.2(8)T	All Cisco IOS versions	All Cisco IOS versions	12.3(11)T
WIC-2AM	Not Supported	12.2(4)YB	12.3(8)T4	12.2(2)XB, 12.2(8)T	12.2(8)T1	12.3(8)T4	12.2(2)XB, 12.2(8)T	All Cisco IOS versions	All Cisco IOS versions	12.3(11)T

 

V.92 is not currently supported.

Analogue Modem WICs

WIC-1AM

WIC-2AM

WIC-1AM and WIC-2AM provide V.90 analog modem interfaces for low density applications (router management, dial backup and access). WIC-1AM includes jack for handset sharing access to PSTN line.

 

Platform Support
Platform	Cisco 1600	Cisco 1700	Cisco 1800	Cisco 2600	Cisco 2600XM	Cisco 2800	Cisco 3600	Cisco 3631	Cisco 2691, 3725, and 3745	Cisco 3800
WIC-1AM	Not Supported	12.2(4)YB	12.3(8)T4	12.2(2)XB, 12.2(8)T	12.2(8)T1	12.3(8)T4	12.2(2)XB, 12.2(8)T	All Cisco IOS versions	All Cisco IOS versions	12.3(11)T
WIC-2AM	Not Supported	12.2(4)YB	12.3(8)T4	12.2(2)XB, 12.2(8)T	12.2(8)T1	12.3(8)T4	12.2(2)XB, 12.2(8)T	All Cisco IOS versions	All Cisco IOS versions	12.3(11)T

1 and 2 Port E1 Multi-Flex Trunk VWIC

Product	Description
VWIC-1MFT-E1	1-Port RJ-48 Multiflex Trunk – E1
VWIC-2MFT-E1	2-Port RJ-48 Multiflex Trunk – E1
VWIC-2MFT-E1-DI	2-Port RJ-48 Multiflex Trunk – E1 With Drop and Insert
VWIC-1MFT-G703	1-Port RJ-48 Multiflex Trunk – E1 for unstructured G.703
VWIC-2MFT-G703	2-Port RJ-48 Multiflex Trunk – E1 for unstructured G.703

 

This Multi-Flex Trunk may be used as a Voice Interface Card or as a WAN Interface Card (in a WIC slot in the 2600 or 3600). Thus it is a Voice WAN Interface Card (VWIC).

 

Platform Support
Feature	1600	1700	1800	2600			2600XM			2800	3600			3631	2691, 3725, 3745			3800
Carrier Module	On-Board	On-Board	On-Board	On-Board	NM-2W	High Density Voice NM	On-Board	NM-2W	High Density Voice NM	On-Board	NM-1E2W, NM-1E1R2W, NM-2E2W	NM-1FE2W, NM-1FE1R2W, NM-2FE2W, NM-2W	High Density Voice NM	On-Board	On-Board	NM-1FE2W, NM-1FE2W-V2, NM-2FE2W, NM-2FE2W-V2, NM-1FE1R2W, NM-2W	High Density Voice NM	On-Board	NM-1FE2W, NM-1FE2W-V2, NM-2FE2W, NM-2FE2W-V2, NM-1FE1R2W, NM-2W
VWIC-1MFT-E1	Not supported	12.2(4)YB, 12.2(8)YJ	12.3(8)T4	12.0(5)XK, 12.0(7)T, 12.1, 12.1T, 12.2, 12.2T	12.0(7)XK, 12.1(1)T, 12.2, 12.2T	12.0(7)XK, 12.1(2)T, 12.2, 12.2T	All Cisco IOS versions	12.2(8)T1	12.2(8)T1	12.3(8)T4	12.0(5)XK, 12.0(7)T, 12.1, 12.1T, 12.2, 12.2T	12.0(7)XK, 12.1(1)T, 12.2, 12.2T	12.0(7)XK, 12.1(2)T, 12.2, 12.2T	All Cisco IOS versions	12.2(8)T 12.2(13)T3 for V2 NMs		12.3(4)T	12.3(11)T
VWIC-2MFT-E1	Not supported	12.2(4)YB, 12.2(8)YJ	12.3(8)T4	12.0(5)XK, 12.0(7)T, 12.1, 12.1T, 12.2, 12.2T	12.0(7)XK, 12.1(1)T, 12.2, 12.2T	12.0(7)XK, 12.1(2)T, 12.2, 12.2T	All Cisco IOS versions	12.2(8)T1	12.2(8)T1	12.3(8)T4	Not supported	12.0(7)XK, 12.1(1)T, 12.2, 12.2T	12.0(7)XK, 12.1(2)T, 12.2, 12.2T	All Cisco IOS versions	12.2(8)T 12.2(13)T3 for V2 NMs		12.3(4)T	12.3(11)T
VWIC-2MFT-E1-DI	Not supported	12.2(4)YB, 12.2(8)YJ	12.3(8)T4	12.0(5)XK, 12.0(7)T, 12.1, 12.1T, 12.2, 12.2T	12.0(7)XK, 12.1(1)T, 12.2, 12.2T	12.0(7)XK, 12.1(2)T, 12.2, 12.2T	All Cisco IOS versions	12.2(8)T1	12.2(8)T1	12.3(8)T4	12.0(5)XK, 12.0(7)T, 12.1, 12.1T, 12.2, 12.2T	12.0(7)XK, 12.1(1)T, 12.2, 12.2T	12.0(7)XK, 12.1(2)T, 12.2, 12.2T	All Cisco IOS versions	12.2(8)T 12.2(13)T3 for V2 NMs		12.3(4)T	12.3(11)T
VWIC-1MFT-G703	Not supported	12.2(8)YJ	12.3(8)T4	12.1(1)T, 12.2, 12.2T	12.1(1)T, 12.2, 12.2T	Not supported	12.2(8)T1	12.2(8)T1	Not supported	12.3(8)T4	12.1(1)T, 12.2, 12.2T	12.1(1)T, 12.2, 12.2T	Not supported	All Cisco IOS versions	12.2(8)T 12.2(13)T3 for V2 NMs		12.3(4)T	12.3(11)T
VWIC-2MFT-G703	Not supported	12.2(8)YJ	12.3(8)T4	12.1(1)T, 12.2, 12.2T	12.1(1)T, 12.2, 12.2T	Not supported	12.2(8)T1	12.2(8)T1	Not supported	12.3(8)T4	Not supported	12.1(1)T, 12.2, 12.2T	Not supported	All Cisco IOS versions	12.2(8)T 12.2(13)T3 for V2 NMs		12.3(4)T	12.3(11)T

 

2nd Generation 1 and 2 Port T1E1 Multiflex Trunk Voice WAN Interface Cards

Product	Description
VWIC2-1MFT-T1/E1	1-Port T1/E1 Multiflex Trunk Voice/WAN Interface Card
VWIC2-2MFT-T1/E1	2-Port T1/E1 Multiflex Trunk Voice/WAN Interface Card
VWIC2-1MFT-G703	1-Port G.703 Multiflex Trunk Voice/WAN Interface Card
VWIC2-2MFT-G703	2-Port G.703 Multiflex Trunk Voice/WAN Interface Card

 

* Have an onboard slot for a Cisco MFT Dedicated Echo Cancellation (ECAN) Module (part number EC-MFT-32 or EC-MFT-64),

* Support both T1 and E1, providing additional flexibility in configuring the Cisco MFT VWIC2s for supporting T1, fractional T1, E1, and fractional E1 for both voice and WAN applications.

*Include the drop-and-insert multiplexing capability

*enable each port to be clocked from independent clock sources for data applications.

 

Platform Support
Feature	1721,1751,1760	1841 (data only)	2600XM	2691	3662	3700	2800	3800
VWIC2-XXXX	12.3(14)T	12.3(14)T	12.3(14)T	12.3(14)T	12.3(14)T	12.3(14)T	12.3(14)T	12.3(14)T

 

* Please see the following link for more info about WIC/NM/VIC constraint:

** Data applications require at a minimum the IP Base feature set license and voice applications require at a minimum the IP Voice feature set license.

Virtual Private Network (VPN) modules

Product	Description	Performance
AIM-VPN/BP	DES/3DES VPN Encryption AIM – Base Performance	2-6Mb/s, 150 tunnels max
AIM-VPN/EP	DES/3DES VPN Encryption AIM – Enhanced Performance	4-14Mb/s, 400 tunnels (2650 performance)
AIM-VPN/HP	DES/3DES VPN Encryption AIM – High Performance	10-24Mb/s, 900 tunnels max
AIM-VPN/BPII	DES/3DES/AES VPN Encryption/Compression Module for 2600XM	20-Mbps 3DES performance in 2611 and up to 22 Mbps on the Cisco 2651XM
AIM-VPN/EPII	DES/3DES VPN Encryption AIM – High Performance	up to 150 Mb/s, 2000 tunnels max
AIM-VPN/HPII	DES/3DES VPN Encryption AIM – High Performance	up to 180 Mb/s, 2000 tunnels max
NM-VPN/MP	DES/3DES VPN Encryption NM for 3620/3640 – Mid Performance	5-12Mb/s, 400 tunnels max
AIM-VPN/BPII-PLUS	DES/3DES/AES Encryption AIM – Base Performance	up to 20-22 Mbps
AIM-VPN/EPII-PLUS	DES/3DES/AES Encryption AIM – Enhanced Performance	up to 80-150 Mbps
AIM-VPN/HPII-PLUS	DES/3DES/AES Encryption AIM – High Performance	up to 180 Mbps

 

Platform Support
IOS Support	1800	2600	2600XM	2800	3620	3631	3640	3660	2691, 3725	3745	3825	3845
AIM-VPN/BP	Not Supported	12.1(3a)XI1, 12.2(1), 12.2(2)T, 12.3(1)	12.2(12), 12.2(8)T1, 12.2(11)YT, 12.3(1), 12.3(2)T	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported
AIM-VPN/EP	Not Supported	12.2(2)T, 12.3(1)	12.2(8)T1, 12.2(11)YT, 12.3(1), 12.3(2)T	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported	12.2(8)T1, 12.2(11)YT, 12.3(1), 12.3(2)T	Not Supported	Not Supported	Not Supported
AIM-VPN/HP	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported	12.1(3a)XI1, 12.2(1), 12.2(2)T, 12.2(11)YT, 12.3(1), 12.3(2)T	Not Supported	12.2(8)T1, 12.2(11)YT, 12.3(1), 12.3(2)T	Not Supported	Not Supported
AIM-VPN/BPII	Not Supported	12.1(3a)XI1, 12.2(1), 12.2(2)T, 12.3(1)	12.2(12), 12.2(8)T1, 12.2(11)YT, 12.3(1), 12.3(2)T	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported
AIM-VPN/EPII	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported	12.2(13)T, 12.3(1), 12.3(2)T	Not Supported	Not Supported	Not Supported
AIM-VPN/HPII	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported	12.2(13)T, 12.3(1), 12.3(2)T	Not Supported	12.2(13)T, 12.3(1), 12.3(2)T	Not Supported	Not Supported
NM-VPN/MP	Not Supported	Not Supported	Not Supported	Not Supported	12.1(3a)XI1, 12.2(1), 12.2(2)T, 12.3(1)	Not Supported	12.1(3a)XI1, 12.2(1), 12.2(2)T, 12.3(1), 12.3(2)T	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported
AIM-VPN/BPII-PLUS	12.3(8)T	Not Supported	12.3(5c)/12.3(6), 12.3(7)T	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported
AIM-VPN/EPII-PLUS	Not Supported	Not Supported	Not Supported	12.3(8)T	Not Supported	Not Supported	Not Supported	Not Supported	12.3(5c)/12.3(6), 12.3(7)T	Not Supported	12.3(11)T	Not Supported
AIM-VPN/HPII-PLUS	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported	Not Supported	12.3(5c)/12.3(6), 12.3(7)T	Not Supported	12.3(5c)/12.3(6), 12.3(7)T	Not Supported	12.3(11)T

 

Software Prerequisites: Cisco IOS software with the “IPSEC” or “Advanced Security” or higher feature set and maximum ONE Encryption modules/AIMs per Router

EtherSwitch 4- and 9-Port High-Speed WAN Interface Cards

HWIC-4ESW

HWIC-D-9ESW

Product	Description	Features
HWIC-4ESW	4-port Cisco EtherSwitch 10BASE-T/100BASE-TX autosensing HWIC	4 or 9 10BASE-T/100BASE-TX ports Autosensing, Autonegotiation, and Auto-MDIX Integrated switching 802.1P QoS (Traffic Prioritization) 802.1Q Trunking 802.1D Spanning Tree Protocol Voice VLAN (VLAN) 1
HWIC-4ESW-POE	4-port Cisco EtherSwitch 10BASE-T/100BASE-TX autosensing HWIC with power daughter card
HWIC-D-9ESW	9-port Cisco EtherSwitch 10BASE-T/100BASE-TX autosensing HWIC
HWIC-D-9ESW-POE	9-port Cisco EtherSwitch 10BASE-T/100BASE-TX autosensing HWIC with power daughter card

Note:

1. 1. 1. This part number (HWIC-4ESW-POE / HWIC-D-9ESW-POE) should be ordered only if you require in-line power.
         You must also order the matching internal power unit to support in-line power on a Cisco 2800 or Cisco 3800 router.
      2. The HWIC-D-9ESW card provides inline power through only 8 of its ports, ports 0 through 7.

   The ninth port (port 8) is intended to be a stacking port, and as such, does not support inline power.

 

1. The inline power daughter cards are NOT interchangeable between the 4-port and the (8+1)-port HWICs.
2. There is no option to unstack two HWIC switches. When two HWIC switches are in the same chassis,
   they can operate only in stacked mode. If the user configures the switches to operate unstacked, the switches
   will not operate correctly. All combinations of HWIC switches may be stacked: two HWIC-D-9ESWs, an
   HWIC-D-9ESW with an HWIC-4ESW, or two HWIC-4ESWs.

 

Product	Description
PWR-2801-AC-IP=	Cisco 2801 AC inline power supply
PWR-2811-AC-IP=	Cisco 2811 AC inline power supply
PWR-2821-51-AC-IP=	Cisco 2821 and Cisco 2851 AC inline power supply
PWR-3825-AC-IP=	Cisco 3825 AC-IP power supply
PWR-3845-AC-IP=	Cisco 3845 AC-IP power supply

 

Platform Support
IOS Support	1800	2600	2600XM	2800	3620	3631	3640, 3640A, 3660	2691, 3725, 3745	3800
HWIC-4ESW	12.3(8)T4	Not supported	Not supported	12.3(8)T4	Not supported	Not supported	Not supported	Not supported	12.3(11)T
HWIC-4ESW-POE	Not supported
HWIC-D-9ESW	Not supported
HWIC-D-9ESW-POE

 

Note: The Cisco 2801 can take 2 single-wide (HWIC) or 2 double-wide (HWIC-D) whilst the Cisco 2811, 2821, 2851 can accept 4 single-wide (HWIC) or 2 double-wide (HWIC-D).

 

HWIC-4A/S

4-port multiprotocol low speed asynchronous/synchronous HWIC.
Protocols supported are Async (SLIP), Async (PPP), HDLC, Bisync, and transparent.

Interfaces supported are as follows:
– In both DTE and DCE formats: V35, X21, RS-232, and RS-449
– In DTE format only: EIA-530 and EIA-530A

The maximum data rate supported is 256 kbps per port (synchronous).
The maximum data rate supported is 256 kbps per port 230.4 kbps (asynchronous).

Platform Support

Platform	Cisco 1600	Cisco 1700	Cisco 1841	Cisco 2600 and 2600XM	Cisco 2800	Cisco 3600	Cisco 3700	Cisco 3800
HWIC-4A/S	Not supported	Not supported	12.3(14)T	Not supported	12.3(14)T	Not supported	Not supported	12.3(14)T

 

Notes:
Connector type is Smart Serial. Available cables can be found here .

HWIC-8A/S-RS232

 

The 8-port RS-232 asynchronous/synchronous HWIC provides 8 asynchronous/synchronous
RS-232 interfaces in both DCE and DTE formats. Data rates of up to 230.4 kbps are supported
in asynchronous mode, and up to 256 kbps in synchronous mode.

The 8-port RS-232 asynchronous/synchronous HWIC uses a quad cable, consisting of a 68-pin
connector on the interface card end and four DB25 connectors on the system end (as pictured).
This cable is available in either DCE or DTE format. The cables include:

Cables
Product Number	Cable Type	Length	Connector Type
CAB-HD4-232FC	4-port EIA-232 DCE	10 ft (3m)	Female DB-25
CAB-HD4-232MT	4-port EIA-232 DTE	10 ft (3m)	Male DB-25

 

Platform Support
Platform	Cisco 1600	Cisco 1700	Cisco 1841	Cisco 2600 and 2600XM	Cisco 2800	Cisco 3600	Cisco 3700	Cisco 3800
HWIC-8A/S-RS232	Not supported	Not Supported	12.3(14)T	Not supported	12.3(14)T	Not supported	Not supported	12.3(14)T

HWIC-8A

 

The 8-port asynchronous HWIC, provides 8 asynchronous RS-232 interfaces in DTE format, at
data rates of up to 230.4 kbps.

The 8-Port Asynchronous High-Speed WAN Interface Card and 16-Port Asynchronous High-Speed
WAN Interface Card use one (HWIC-8A) or two (HWIC-16A) high-density 8-port connectors. The
8-port asynchronous cable provides the high-density connector on one end and eight RJ-45 plugs
on the other. RJ-45- to DB-25 modular adapters are used to convert the RJ-45 to DB-25 DTE or
DB-25 DCE connections.

 

Cables
Product Number	Cable Type	Length	Connector Type
CAB-HD8-ASYNC	8-port EIA-232	10 ft (3m)	RJ-45
CAB-HD8-KIT	8-port EIA-232 plus eight CAB-25AS-MMOD	10 ft (3m)	Male DB-25
CAB-25AS-MMOD	RJ-45 to DB-25 adapter		Male DB-25
CAB-25AS-FDTE	RJ-45 to DB-25 adapter		Female DB-25

 

Platform Support
Platform	Cisco 1600	Cisco 1700	Cisco 1841	Cisco 2600 and 2600XM	Cisco 2800	Cisco 3600	Cisco 3700	Cisco 3800
HWIC-8A	Not supported	Not Supported	12.3(14)T	Not supported	12.3(14)T	Not supported	Not supported	12.3(14)T

HWIC-AP-G-X

 

1. Mounting screws
2. RP-TNC connectors
3. OK LED for the 802.11b/g radio
4. DATA LED for the radio

This access point high-speed WAN interface card (AP HWIC) is a single-wide interface card that houses one radio (single-mode) for connection to a wireless LAN. This interface card operates as an access point when installed in a modular access router with AP HWIC support.

Dual-mode AP carrier card with RP-TNC connectors, dual antennas, and two radios: one 2.4-GHz 802.11b/g
radio and one 5-GHz 802.11a radio. The following are the Cisco part numbers and the geographic regions
for which the interface cards are configured:
– HWIC-AP-G-A—North America
– HWIC-AP-G-E—Europe
– HWIC-AP-G-J—Japan

Platform Support
Platform	Cisco 1600	Cisco 1700	Cisco 1841	Cisco 2600 and 2600XM	Cisco 2800	Cisco 3600	Cisco 3700	Cisco 3800
HWIC-AP-AG-x	Not supported	Not Supported	12.4 T	Not supported	12.4 T	Not supported	Not supported	12.4 T

 

Notes:
– RP-TNC Swivel-mount Omnidirectional Dipole antennas are included with the HWICs.
– Only one AP HWIC is supported in the router at a time. Installation of two AP HWICs in the router is not supported.

HWIC-AP-AG-x

 

1. Mounting screws
2. RP-TNC connectors
3. OK LED for the 802.11b/g radio
4. OK LED for the 802.11b/g radio
5. DATA LED for the 802.11a radio
6. DATA LED for the 802.11b/g radio

This access point high-speed WAN interface card (AP HWIC) is a single-wide interface card that houses
two radios (dual-mode) for connection to a wireless LAN. This interface card operates as an access point
when installed in a modular access router with AP HWIC support.

Dual-mode AP carrier card with RP-TNC connectors, dual antennas, and two radios: one 2.4-GHz 802.11b/g
radio and one 5-GHz 802.11a radio. The following are the Cisco part numbers and the geographic regions
for which the interface cards are configured:
– HWIC-AP-AG-A—North America
– HWIC-AP-AG-E—Europe
– HWIC-AP-AG-J—Japan

 

Platform Support
Platform	Cisco 1600	Cisco 1700	Cisco 1841	Cisco 2600 and 2600XM	Cisco 2800	Cisco 3600	Cisco 3700	Cisco 3800
HWIC-AP-AG-x	Not supported	Not Supported	12.4 T	Not supported	12.4 T	Not supported	Not supported	12.4 T

Notes:
– RP-TNC Swivel-mount Omnidirectional Dipole antennas are included with the HWICs.
– Only one AP HWIC is supported in the router at a time. Installation of two AP HWICs in the router is not supported.
– The 4.9-GHz band is not supported.

HWIC-1ADSL ( 1 port ADSL/Pots)

Supports ADSL over basic telephone service with Annex A ITU G. 992.1 (ADSL), G.992.3 (ADSL2), and G.992.5 (ADSL2+)

Supports Dying Gasp function and has one RJ-11 ADSL interface

Platform Support
Platform	Cisco 1841	Cisco 2800	Cisco 3800
HWIC-1ADSL	12.4(4)T Base	12.4(4)T Base	12.4(4)T Base

 

Supports ADSL over basic telephone service with Annex A ITU G. 992.1 (ADSL), G.992.3 (ADSL2), and G.992.5 (ADSL2+)
Supports Dying Gasp function and has one RJ-11 ADSL interface

* ADSL2+ downstream data rates of up to 24 Mbps and upstream data rates of up to 1.5 Mbps

* ADSL2 downstream rates of up to 12 Mbps and upstream data rates of up to 1 Mbps

HWIC-ADSL-B-S/T (2 port ADSL over Pots)

Has one backup ISDN BRI S/T port (data only) and 1 ADSL over Pots port

Supports ADSL over basic telephone service with Annex A ITU G. 992.1 (ADSL), G.992.3 (ADSL2), and G.992.5 (ADSL2+)

Supports Dying Gasp function and has one RJ-11 ADSL interface

 

Platform Support
Platform	Cisco 1841	Cisco 2800	Cisco 3800
HWIC-ADSL-B-S/T	12.4(6)T Base	12.4(6)T Base	12.4(6)T Base

 

* ADSL2+ downstream data rates of up to 24 Mbps and upstream data rates of up to 1.5 Mbps

* ADSL2 downstream rates of up to 12 Mbps and upstream data rates of up to 1 Mbps

HWIC-1ADSLI ( 1 port ADSL over ISDN)

Supports ADSL over ISDN with Annex B G.992.1 (ADSL), G.992.3 (ADSL2), and G.992.5 (ADSL2+)

Supports reach-extended ADSL2 standard (G.992.3) Annex L

Supports Dying Gasp function and has one RJ-11 ADSL interface

 

Platform Support
Platform	Cisco 1841	Cisco 2800	Cisco 3800
HWIC-1ADSLI	12.4(4)T Base	12.4(4)T Base	12.4(4)T Base

 

* ADSL2+ downstream data rates of up to 24 Mbps and upstream data rates of up to 1.5 Mbps

* ADSL2 downstream rates of up to 12 Mbps and upstream data rates of up to 1 Mbps

HWIC-ADSLI-B-S/T (2 port ADSL over ISDN)

Has one backup ISDN BRI S/T port (data only) and 1 ADSL over ISDN port

Supports ADSL over ISDN with Annex B G.992.1 (ADSL), G.992.3 (ADSL2), and G.992.5 (ADSL2+)

Supports reach-extended ADSL2 standard (G.992.3) Annex L

Supports Dying Gasp function and has one RJ-11 ADSL interface

 

Platform Support
Platform	Cisco 1841	Cisco 2800	Cisco 3800
HWIC-ADSLI-B-S/T	12.4(6)T Base	12.4(6)T Base	12.4(6)T Base

 

* ADSL2+ downstream data rates of up to 24 Mbps and upstream data rates of up to 1.5 Mbps

* ADSL2 downstream rates of up to 12 Mbps and upstream data rates of up to 1 Mbps

Aladdin eToken

Aladdin eToken is a USB-based smartcard device used for strong user authentication and secured storage. Combining eToken drivers with Cisco integrated services routers helps Cisco partners mount router configuration on eToken drivers and securely send them to end customers. End customers will then upload the configuration directly to the router by attaching eToken to the new USB port.

The USB eToken is supplied by Aladdin Knowledge Systems. To order eTokens or for more information, please contact Aladdin Knowledge Systems at http://www.ealaddin.com/etoken/cisco.

 

Platform Support
IOS Support	Cisco 1800	Cisco 2800	Cisco 3800
Aladdin eToken	12.3(14)T	12.3(14)T	12.3(14)T

 

USB Flash

The USB Flash feature provides an optional secondary storage capability. Images, configurations, or other files can be copied to or from the Cisco USB Flash memory with the same reliability as storing and retrieving files using the Compact Flash card.

 

Platform Support
Part Number	Description	1800	2800	3800
MEMUSB-64FT	64 MB USB Flash	12.3(14)T	12.3(14)T	12.3(14)T
MEMUSB-128FT	128 MB USB Flash	12.3(14)T	12.3(14)T	12.3(14)T
MEMUSB-256FT	256 MB USB Flash	12.3(14)T	12.3(14)T	12.3(14)T